Main - ANT 4135F Multifunctional agricultural tractor

CONTACTS

REQUEST A PRICE

We will contact you!

MAIN DEALERS CONTACTS DOWNLOAD

Multifunctional agricultural tractor
ANT 4135FB
The tractor is intended to perform a wide range of all-purpose agricultural works. The machinery is used for primary and secondary cultivation, for sowing grain and other crops (as a part of wide-cut and seedbed facilities), for harvesting (as a part of high-performance harvesting equipment for forage conservation, grain harvesting, loading and transportation works).

ADVANTAGES

Due to high value of torque backup engines can work at low revolutions with heavy load without frequent gear shifts.

Power-assisted distribution box and extended axle allow heavy loading.

Available PTO shaft provides the usage of a tractor as power station to drive various stationary agricultural and industrial machines.

CAPACITY

Due to powerful engine and higher weight of the tractor, the maximum productivity is achieved in all conditions.

ENDURANCE

The tractor is built as a reliable machine, even at the maximum performance.

ECONOMICAL EFFICIENCY

Low fuel consumption and reasonably priced spare parts make ANT tractor one of the most popular machines in the market.

TECHNICAL SPECIFICATIONS

Maximum power	100 kW
Maximum torque	568±5 Nm
Cooling system	fluid
Number of gears	16/8 (forward/backward)
Pump capacity	55 l/min
Number of outer hydraulic outputs	6 pieces
Speed, forward (min/max)	1,7/35 km/h
Speed, backward (min/max)	2,9/16,4 km/h
Fuel tank (side-mounted)	125 l
Fuel tank (under the cabin)	130 l
Tyres, maximum size (front)	420/70R24
Tyres, maximum size (rear)	18.4R38

ENGINE

The exclusive popularity of this type of engine is based on low fuel consumption, reliable and simple configuration. These features make it possible to reduce both procurement and maintenance expenses, and provide flawless operation.

Model	MMZ D-260.2S2	MMZ D-260.2S3А
Power	96.9 kW (132 h.p.)
Rated speed	2100 RPM
Number of cylinders	6 pieces
Diameter of cylinder/piston stroke	110/125 mm
Maximum torque	568 Nm	570 Nm
Fuel injection system	mechanical
Minimum stable idle speed	800 ± 50 min^–1
Specific fuel consumption	249 g/kWh	244 g/kWh
Rated index of torque reserve	25 %
Rated oil consumption (max.)	0,4 %	0,2 %
Engine working volume	7120 cm³

TRANSMISSION

Drives switching (rear PTO shaft, front PTO shaft (on request), front driving axle, differential lock.

Transmission oil filtration.

Pressure-feed lubrication of gearbox bearings, rear axle planetary reducers, front driving axle support.

Clutch booster operation.

Drive type	4WD, front axle on demand
Gear box type	Mechanical, synchronized
Drawbar category	2
Number of gears [forward/reverse]	16/18	24/12 \| _axle2=24,4292	24/12 \| _axle2=27,3333
Speed, km/h [forward/reverse]	36,9/16,4	38,6/17,2	35,7/15,9

CABIN

One-seat cabin with a protective rigid frame, thermally insulated, with noise and vibration protection, equipped with a sprung seat, adjustable according to the weight and height of the operator. The cabin is equipped with rear-view mirrors (rear-view mirrors with electric drive and heating can be installed according to the customer’s request), sun visor, front and rear window electric wipers, front and rear window washers, flood lamp lighting, and a specially prepared installation site for radio receiver (including harness for connection). The cabin complies with category II according to EN 15695-1:2009.

Heating and air conditioning system (on request – with automatic climate control system). By request, the tractor can be equipped with an additional seat. Cabin doors are equipped with locks; keys lock the left door. The right door is an emergency exit.

PERFORMANCE SPECIFICATIONS

In the tractors of ANT 4135FB series, special attention is paid to simple, intelligent and rational execution. This is the only way to achieve reliability, ease of maintenance and quick operation.

Clearance, not less: - between the axles - under the front axle - under the rear axle	660 mm 650 mm 620 mm
Wheel track dimensions: - front wheels track - back wheels track	1535 – 2120 mm 1650 – 2260 mm
Tractor base	2760 mm
Maximum wading depth	0,85 m
Tyres (basic equipment): - front tyres - rear tyres	420/70R24 18.R38

Operating weight: - basic equipment - maximum allowed	5700 ±100 kg 8000 ±100 kg
Operating weight distribution on axles: - front - rear	2615 ±40 kg 3500 ±40 kg
Loaded weight of a towed trailer: - without brakes - with independent braking - with inertial braking - with hydraulic and pneumatic braking	2000 kg 2500 kg 3500 kg 20000 kg
Stability angle at operation in any direction	50°
Gradeability on hard dry ground	30 %

HYDRAULIC SYSTEM

Oil suction is effected by means of single-acting and double-acting hydraulic cylinders.

Compensation for oil volume lack, caused by oil delivery to hydraulic cylinders and machine units, is provided after testing the functioning of the tractor hydraulic system with the machine.

Oil consumption by hydraulic motors drives. In this case, the machinery application should mandatory be agreed with the Manufacturer.

REAR ATTACHMENT

Lifting control system for 3-point attachment	electronic, EHR Saleo
3-point attachment category	II, III (depending on the PC)
Attachment loading capacity	67 kN
Maximum PTO power	83,3 kW
PTO shaft speed, RMP: - I stage - II stage	540 rpm 1000 rpm
PTO shank, replaceable	21 splines

FRONT ATTACHMENT (OPTIONALLY)

3-point attachment category	II
Attachment loading capacity on the suspension axis	25 kN
At a reach of 610 mm from suspension axis	20 kN
Maximum PTO power	44 kW
PTO shaft speed, RPM	1000 rpm
PTO shank, non-replaceable	21 splines