Multifunctional agricultural tractor
ANT 4135FB
The tractor is intended to perform a wide range of all-purpose agricultural works. The machinery is used for primary and secondary cultivation, for sowing grain and other crops (as a part of wide-cut and seedbed facilities), for harvesting (as a part of high-performance harvesting equipment for forage conservation, grain harvesting, loading and transportation works).
ANT 4135FB
The tractor is intended to perform a wide range of all-purpose agricultural works. The machinery is used for primary and secondary cultivation, for sowing grain and other crops (as a part of wide-cut and seedbed facilities), for harvesting (as a part of high-performance harvesting equipment for forage conservation, grain harvesting, loading and transportation works).
ADVANTAGES
Due to high value of torque backup engines can work at low revolutions with heavy load without frequent gear shifts. Power-assisted distribution box and extended axle allow heavy loading. Available PTO shaft provides the usage of a tractor as power station to drive various stationary agricultural and industrial machines.
CAPACITY
Due to powerful engine and higher weight of the tractor, the maximum productivity is achieved in all conditions.
ENDURANCE
The tractor is built as a reliable machine, even at the maximum performance.
ECONOMICAL EFFICIENCY
Low fuel consumption and reasonably priced spare parts make ANT tractor one of the most popular machines in the market.
TECHNICAL SPECIFICATIONS
| Maximum power | 100 kW |
| Maximum torque | 568±5 Nm |
| Cooling system | fluid |
| Number of gears | 16/8 (forward/backward) |
| Pump capacity | 55 l/min |
| Number of outer hydraulic outputs | 6 pieces |
| Speed, forward (min/max) | 1,7/35 km/h |
| Speed, backward (min/max) | 2,9/16,4 km/h |
| Fuel tank (side-mounted) | 125 l |
| Fuel tank (under the cabin) | 130 l |
| Tyres, maximum size (front) | 420/70R24 |
| Tyres, maximum size (rear) | 18.4R38 |
ENGINE
| Model | MMZ D-260.2S2 | MMZ D-260.2S3А |
| Power | 96.9 kW (132 h.p.) | |
| Rated speed | 2100 RPM | |
| Number of cylinders | 6 pieces | |
| Diameter of cylinder/piston stroke | 110/125 mm | |
| Maximum torque | 568 Nm | 570 Nm |
| Fuel injection system | mechanical | |
| Minimum stable idle speed | 800 ± 50 min–1 | |
| Specific fuel consumption | 249 g/kWh | 244 g/kWh |
| Rated index of torque reserve | 25 % | |
| Rated oil consumption (max.) | 0,4 % | 0,2 % |
| Engine working volume | 7120 cm3 | |
TRANSMISSION
Drives switching (rear PTO shaft, front PTO shaft (on request), front driving axle, differential lock. Transmission oil filtration. Pressure-feed lubrication of gearbox bearings, rear axle planetary reducers, front driving axle support. Clutch booster operation.| Drive type | 4WD, front axle on demand | ||
| Gear box type | Mechanical, synchronized | ||
| Drawbar category | 2 | ||
| Number of gears [forward/reverse] | 16/18 | 24/12 | axle2=24,4292 |
24/12 | axle2=27,3333 |
| Speed, km/h [forward/reverse] | 36,9/16,4 | 38,6/17,2 | 35,7/15,9 |
CABIN
One-seat cabin with a protective rigid frame, thermally insulated, with noise and vibration protection, equipped with a sprung seat, adjustable according to the weight and height of the operator.
The cabin is equipped with rear-view mirrors (rear-view mirrors with electric drive and heating can be installed according to the customer’s request), sun visor, front and rear window electric wipers, front and rear window washers, flood lamp lighting, and a specially prepared installation site for radio receiver (including harness for connection).
The cabin complies with category II according to EN 15695-1:2009.
Heating and air conditioning system (on request – with automatic climate control system). By request, the tractor can be equipped with an additional seat. Cabin doors are equipped with locks; keys lock the left door. The right door is an emergency exit.
PERFORMANCE SPECIFICATIONS
| Clearance, not less: - between the axles - under the front axle - under the rear axle |
660 mm 650 mm 620 mm |
| Wheel track dimensions: - front wheels track - back wheels track |
1535 – 2120 mm 1650 – 2260 mm |
| Tractor base | 2760 mm |
| Maximum wading depth | 0,85 m |
| Tyres (basic equipment): - front tyres - rear tyres |
420/70R24 18.R38 |
| Operating weight: - basic equipment - maximum allowed |
5700 ±100 kg 8000 ±100 kg |
| Operating weight distribution on axles: - front - rear |
2615 ±40 kg 3500 ±40 kg |
| Loaded weight of a towed trailer: - without brakes - with independent braking - with inertial braking - with hydraulic and pneumatic braking |
2000 kg 2500 kg 3500 kg 20000 kg |
| Stability angle at operation in any direction | 50° |
| Gradeability on hard dry ground | 30 % |
HYDRAULIC SYSTEM
Oil suction is effected by means of single-acting and double-acting hydraulic cylinders. Compensation for oil volume lack, caused by oil delivery to hydraulic cylinders and machine units, is provided after testing the functioning of the tractor hydraulic system with the machine. Oil consumption by hydraulic motors drives. In this case, the machinery application should mandatory be agreed with the Manufacturer.
REAR ATTACHMENT
FRONT ATTACHMENT (OPTIONALLY)
| Lifting control system for 3-point attachment | electronic, EHR Saleo |
| 3-point attachment category | II, III (depending on the PC) |
| Attachment loading capacity | 67 kN |
| Maximum PTO power | 83,3 kW |
| PTO shaft speed, RMP: - I stage - II stage |
540 rpm 1000 rpm |
| PTO shank, replaceable | 21 splines |
FRONT ATTACHMENT (OPTIONALLY)
| 3-point attachment category | II |
| Attachment loading capacity on the suspension axis | 25 kN |
| At a reach of 610 mm from suspension axis | 20 kN |
| Maximum PTO power | 44 kW |
| PTO shaft speed, RPM | 1000 rpm |
| PTO shank, non-replaceable | 21 splines |
ATTACHABLE EQUIPMENT
- Number of operating positions 4
- Operating width 2460/2473/2487 mm
- Number of hydraulic cylinders 2 pcs
- Cutting blades Y-shaped blades and beaters
- Maximum operating width 5920 mm
- Number of blades 36/44 (18/22)
CONTACTS
CONTACT US
8‑800‑755‑90‑98
8‑800‑755‑90‑98
WE ARE AVAILABLE IN THE SOCIAL NETWORKING WEBSITES
ANY QUESTIONS?
If you have any questions, or need more information about our cooperation – we will contact you at the earliest possible time!
SUBMIT A REQUEST 
JSC «KOVROV ELECTROMECHANICAL PLANT»
55 Krupskoy str., Kovrov, Vladimir region, Russia
© 2017 – 2022. All rights reserved
REQUEST A PRICE
We will contact you!